Key-off Operation Function Operates even if Operating Conditions are not Satisfied: Procedure

1. Check for LIN communication system DTCs related to the power window control system.
   RESULT:
   
   

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

B → See step   5 

A: Go to next step 

1. Check the power window operation function after the power switch is turned OFF.
   RESULT:
   
   

   Result	Proceed to
   Driver side door or front passenger side door is opened within 45 seconds but power window can still operate	A
   45 seconds pass and the power windows can still operate	B

B → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK) 

A: Go to next step 

1. Use the Data List to check if the main body ECU is functioning properly.
   MAIN BODY:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door Courtesy SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
   P Door Courtesy SW	Front passenger side door courtesy switch signal / ON or OFF	ON: Front passenger door open OFF: Front passenger door closed	-

   OK

   Tester display changes normally when door courtesy switch is operated.

NG → See step   4 

OK → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK) 

1. Open the driver side door and check that the map light illuminates.

   OK

   Map light illuminates.

2. Open the front passenger side door and check that the map light illuminates.

   OK

   Map light illuminates.

NG → See step   6 

OK → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)