DTC Check / Clear
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Connect the Intelligent tester or Techstream to the DLC3.
- Turn the power switch ON (IG).
- Tune the tester on.
- Using the Intelligent tester or Techstream, enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / CCS / DTC INFO.
- Techstream - Select: Powertrain / Cruise Control / Trouble Codes.
- Read the DTCs.
- CLEAR DTC
- Connect the Intelligent tester or Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the tester on.
- Using the Intelligent tester or Techstream, enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / CCS / DTC INFO.
- Techstream - Select: Powertrain / Cruise Control / Trouble Codes.
- Erase the DTCs