Object Recognition Camera: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

INSTALL OBJECT RECOGNITION CAMERA
1. Attach the clip to the camera, and temporarily install the camera with the 3 bolts.
2. Tighten the bolts in the order shown in the illustration.
3. Connect the wire harness.
4. Connect the camera connector.
Fig 1: Identifying Object Recognition Camera Location
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR INNER VIEW MIRROR ASSEMBLY (See INSTALLATION ).
INSTALL RAIN SENSOR COVER (See INSTALLATION ).
INSTALL MAP LIGHT ASSEMBLY (See INSTALLATION ).
ADJUST OBJECT RECOGNITION CAMERA (See ADJUSTMENT ).