LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Interior) >> Front Console Box >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Console Box: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 
    1. Using a molding remover, detach the 8 clips and claw
    2. Remove the finish panel end
  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 
    1. Using a molding remover, detach the 8 clips and claw
    2. Remove the finish panel end
    Fig 1: Identifying Instrument Panel Finish Panel End Clips (LH Side)
    G04946856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Twist the shift lever knob in the direction indicated by the arrow and remove it
    Fig 2: Removing Shift Lever Knob
    G05786940Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO.3 BOX PANEL 
    1. Using a screwdriver, detach the 4 claws

      HINT:

      Tape the screwdriver tip before use

    2. Remove the box panel
    Fig 3: Identifying No.3 Box Panel And Claws
    G04946858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR UPPER CONSOLE PANEL 
    1. Place protective tape as shown in the illustration
    2. Move the shift lever to N
    3. Remove the 2 screws
    4. Using a screwdriver, detach the 6 clips.

      HINT:

      Tape the screwdriver tip before use

    5. Remove the panel and disconnect the connectors
    Fig 4: Identifying Rear Upper Console Panel Clips And Screws
    G04946859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY 
    1. Place protective tape as shown in the illustration
    2. Detach the 2 clips
    3. Remove the console panel and disconnect the connector
    Fig 5: Identifying Upper Console Panel Clips And Screws
    G04946860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY 
    1. Using a molding remover, detach the 5 clips and 2 claws
    2. Remove the end panel and disconnect the connector
  8. REMOVE LOWER CONSOLE COVER 
    1. Remove the cover
    Fig 6: Detaching Clips And Claws
    G05784695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE CONSOLE BOX ASSEMBLY 
    1. Remove the 4 bolts and 2 screws
    2. Disconnect the connectors
    3. Detach the 2 claws and remove the console box
    Fig 7: Locating Console Box And Claws
    G04946862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals