Automatic Light Control Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AUTOMATIC LIGHT CONTROL SENSOR

Fig 1: Identifying Automatic Light Control Sensor Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Attach the 2 claws and install the automatic control sensor.
2. Connect the connector.
INSTALL DEFROSTER NOZZLE ASSEMBLY (See INSTALLATION )
INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (See REASSEMBLY )
INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (See INSTALLATION )
INSTALL INSTRUMENT PANEL SAFETY PAD
HINT.

Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" (see INSTALLATION ).
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).