Automatic Light Control Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE INSTRUMENT PANEL SAFETY PAD
HINT:

Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" (see REMOVAL ).
REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (See DISASSEMBLY )
REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT (See DISASSEMBLY )
REMOVE DEFROSTER NOZZLE ASSEMBLY (See DISASSEMBLY )
REMOVE AUTOMATIC LIGHT CONTROL SENSOR
1. Disconnect the connector.
2. Detach the 2 claws and remove the automatic light control sensor.
  
  Fig 1: Identifying Automatic Light Control Sensor Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002