DTC C1A0C Object Recognition Camera Region Code Mismatch: Description
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
When the object recognition ECU is replaced with a new one, it acquires the country specification information from the driving support ECU. Also, when the driving support ECU is replaced with a new one, it receives country specification information from the combination meter When country specification information in the object recognition ECU and driver monitor ECU do not match, DTC C1A0C is output If the sensor and vehicle country specification information are the same, and the combination meter and the driving support ECU country specification information are different, C1A0A is output.
DTC TROUBLE DETECTION CONDITION CHART
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1A0C | While initial check is running, power switch is ON (IG) and pre-collision system is operating, country specification information in driving support ECU and object recognition ECU do-not match for 1 sec |
|