Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER





(a) Install the receiver with the bolt.
Torque: 15 Nm (153 kgf-cm, 11 ft-lbf)
(b) Connect the connector.
2. INSTALL REAR UPPER PILLAR GARNISH RH Installation
3. INSTALL BACK DOOR SERVICE HOLE COVER RH Reassembly
4. INSTALL BACK DOOR SIDE GARNISH RH Reassembly
5. INSTALL CENTER BACK DOOR GARNISH Reassembly
6. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH Installation
7. INSTALL REAR SEAT COVER CAP Installation
8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation
9. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE Installation
10. INSTALL REAR DOOR SCUFF PLATE RH Installation
11. INSTALL REAR STEP COVER Installation
12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
(a) Install the rear No. 2 seat RH Installation.