April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated): Procedure

RESET POWER WINDOW REGULATOR MOTOR
1. Reset the power window regulator motor. Refer to INITIALIZATION .
2. Check if the power window AUTO UP / DOWN function operates normally.
  OK
  
  AUTO UP / DOWN function operates normally.
OK → END

NG: Go to next step
CHECK DOOR WINDOW REGULATOR
1. Remove the door glass. Refer to DISASSEMBLY .
2. Operate the door window regulator using the switch.
3. Check if the door window regulator operates smoothly.
  OK
  
  Door window regulator operates smoothly.
NG → REPLACE DOOR WINDOW REGULATOR

OK → REPLACE DOOR GLASS RUN (ADJUST DOOR GLASS)

RESET POWER WINDOW REGULATOR MOTOR
1. Reset the power window regulator motor. Refer to INITIALIZATION .
2. Check if the power window AUTO UP / DOWN function operates normally.
  OK
  
  AUTO UP / DOWN function operates normally.
OK → END

NG: Go to next step
CHECK DOOR WINDOW REGULATOR
1. Remove the door glass. Refer to DISASSEMBLY .
2. Operate the door window regulator using the switch.
3. Check if the door window regulator operates smoothly.
  OK
  
  Door window regulator operates smoothly.
NG → REPLACE DOOR WINDOW REGULATOR

OK → REPLACE DOOR GLASS RUN (ADJUST DOOR GLASS)