LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Lighting) >> Headlight Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlight Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT ASSEMBLY 
    1. Connect the connectors.
    2. Install the headlight assembly with the 3 bolts and screw.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 1: Identifying Headlight Assembly Bolts And Screw
      G05252375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL HOOD TO FRONT FENDER SEAL 
  3. INSTALL ENGINE ROOM SIDE COVER  (See INSTALLATION )
  4. INSTALL HOOD HINGE COVER  (See INSTALLATION )
  5. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  6. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight) 
  8. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See  ADJUSTMENT   ) 
  9. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) (See  ADJUSTMENT   ) 
  10. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) (See  ADJUSTMENT   ) 
  11. HEADLIGHT AIMING INSPECTION (See  ADJUSTMENT   ) 
  12. HEADLIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
  13. PERFORM INITIALIZATION (for HID Headlight) 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals