LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Power Door Lock Control System (Diagnostics - Introduction)) >> Power Door Lock Control System >> Customize Parameters >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT: 

    The following items can be customized.

    NOTE:
    • Before attempting to customize vehicle settings, confirm whether it is possible to mark the change that the customer has requested.
    • Be sure to record the current settings before customizing.
    • When troubleshooting, make sure that the item in question has not been disabled using the customize function.
    CUSTOMIZING

    Tester Display Default Contents Setting
    Auto Lock A/T : OFF
    M/T : ON
    Function that locks doors when vehicle speed reaches 20 km/h (13 mph) ON/OFF
    Unlk/Key Twice
    (Unlock w/ 2 times D key operation)
    ON
    • Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice
    • In the OFF setting, turning it once unlocks all doors
    ON/OFF
    All Unlk/Opn-Cl
    (All unlock w/ D door open-close)
    A/T : OFF
    M/T : ON
    Function that unlocks all other doors when opening driver side door within 10 seconds after turning the engine switch off from on (IG) ON/OFF
    Unlock/Park
    (Unlock w/ engine switch on (IG), shift P, speed 0 km/h (0 mph))
    ON Function that unlocks doors when the shift lever is moved to the P position from any other position while the engine switch is on (IG) ON/OFF
    Auto Lock/Shift
    (Auto lock/shift not P)
    ON Function that locks doors when the shift lever is moved from the P position to any other position ON/OFF