April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reverse Shift-linked Function of Power Mirrors does not Operate: Procedure

CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY FUNCTION (MIRROR MASTER SWITCH FUNCTION)
1. Check that the outer rear view mirror LH and RH can be moved using the mirror master switch of the integration control and panel.
  OK
  
  Outer rear view mirror LH and RH can be moved using mirror master switch of integration control and panel.
NG → See step 4

OK: Go to next step
CHECK OPERATION OF SHIFT INDICATOR
1. Check that the shift indicator of the combination meter operates normally. Refer to ON-VEHICLE INSPECTION .
  OK
  
  Shift indicator of combination meter operates normally.
NG → See step 5

OK: Go to next step

CHECK FRONT MULTIPLEX NETWORK DOOR ECU

Check if the malfunction disappears when a normally functioning front multiplex network door ECU is installed.

RESULT:

Result	Proceed to
Outer rear view mirror LH does not operate normally	A
Outer rear view mirror RH does not operate normally	B
Outer rear view mirror LH operates normally	C
Outer rear view mirror RH operates normally	D

D → REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH

C → REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH

B → See step 6

A → REPLACE OUTER MIRROR ACTUATOR ASSEMBLY LH

Go to PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE
Go to METER / GAUGE SYSTEM. Refer to PROBLEM SYMPTOMS TABLE
REPLACE OUTER MIRROR ACTUATOR ASSEMBLY RH. Refer to REMOVAL