System Description

• for AT:

  After the ECM receives a reverse signal from the park/neutral position switch, the ECM sends a reverse signal to the outer mirror control ECU via the CAN and BEAN communication system. The outer mirror control ECU activates the response to the reverse signal.

• for MT:

  The main body ECU (cowl side junction block LH) detects the condition of the back up light switch. The main body ECU (cowl side junction block LH) also sends a back up light switch signal to the outer mirror control ECU via the sends a back up light switch signal to the outer mirror control ECU via the BEAN communication system. The outer mirror control ECU controls the reverse shift-linked function based on the back up light switch signal.

HINT: 

The reverse shift-linked function will not activate when the mirror select switch is in the neutral position (off).