Cruise Control System: Precaution: Precaution

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When disconnecting the negative (-) battery terminal, initialize the following system(s) after the terminal is reconnected.

System Name	See Procedure
Sliding Roof System	Refer to INITIALIZATION
Power Window Control System	Refer to INITIALIZATION

EXPRESSIONS OF IGNITION SWITCH

The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this service information.

Switch Type		Ignition Switch (position)	Engine Switch (condition)
Expression	Ignition switch off	LOCK	Off
	Ignition switch on (IG)	ON	On (IG)
	Ignition switch on (ACC)	ACC	On (ACC)
	Engine start	START	Start

HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
1. Turn the cruise control main switch OFF when not using the cruise control system.
2. Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
3. The RESUME/ACCEL operation changes according to the cruise control system status. When the cruise control system is operating, ACCEL operates. When the cruise control system is not operating, RESUME operates.
4. When the cruise control system is operating and the CRUISE main indicator light blinks, turn the cruise control main switch OFF to reset the cruise control system. After the reset, if the cruise control main switch cannot be turned ON, or the cruise control system is canceled immediately after turning the cruise control main switch ON, the system may have a malfunction.
5. Do not use the cruise control system where the road conditions are as follows:
  - Heavy traffic
  - Steep downhill
  - Roads with sharp turns
  - Icy or snowy roads
  - Slippery roads
6. Do not use the cruise control system while towing.