Window Defogger Wire: Repair: Repair

REPAIR DEFOGGER WIRE

Fig 1: Placing Masking Tape Along Both Sides Of Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Clean the broken wire tips with grease, wax and silicone remover.
2. Place masking tape along both sides of the wire.
3. Thoroughly mix the repair agent.
  DuPont paste
  
  No. 4817 or equivalent
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
  NOTE:
  Do not repair the defogger wire again for at least 24 hours.