Typical Enabling Conditions
| Monitor runs whenever following DTCs are not present | P0010, P0020, P1023, P1360, P1361, P1362, P1363, P1364, P1365, P1366, P1367, P2614 (Motor drive VVT system control module) P0011, P0021 (VVT System - Advance) P0012, P0022 (VVT System - Retard) P0013, P0023 (Exhaust VVT Oil control valve) P0014, P0024 (Exhaust VVT System - Advance) P0015, P0025 (Exhaust VVT System - Retard) P0016, P0018 (VVT System - Misalignment) P0017, P0019 (Exhaust VVT System - Misalignment) P0031, P0032, P0051, P0052 (Air fuel ratio sensor heater) P0102, P0103 (Mass air flow meter) P0115, P0117, P0118 (Engine coolant temperature sensor) P0125 (Insufficient coolant temperature for closed loop fuel control) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle position sensor) P0335 (Crankshaft position sensor) P0340, P0342, P0343, P0345, P0347, P0348, P1340 (VVT sensor) P0351 - P0358 (Igniter) P0365, P0367, P0368, P0390, P0392, P0393 (Exhaust VVT sensor) |
| Fuel system status | Closed loop |
| Battery voltage | 11 V or higher |
| When either condition below is met: | Condition 1 or 2 |
| 1. Engine RPM | Less than 1100 rpm |
| 2. Engine load | 10% or more |
| Catalyst monitor | Not executed |