Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
DYNAMIC RADAR CRUISE CONTROL SYSTEM
| Symptom | Suspected Area | See |
|---|---|---|
| The cruise control main switch cannot be turned on. | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| CRUISE main indicator light circuit | Refer to Cruise Main Indicator Light Circuit | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Setting cannot be changed between constant speed control mode and vehicle-to-vehicle distance control mode. | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| Meter/gauge system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Set distance cannot be changed. | Distance control switch circuit | Refer to Distance Control Switch Circuit |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| Meter/gauge system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Setting cannot be canceled in vehicle-to-vehicle distance control mode. | Meter/gauge system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Driving support ECU power source circuit | Refer to ECU Power Source Circuit | |
| LGND terminal circuit | Refer to TERMINALS OF ECU | |
| Millimeter wave radar sensor | Refer to ADJUSTMENT | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| Vehicle speed setting cannot be performed. (The cruise main indicator light on combination meter illuminates when main switch is turned on, but turns off when operating SET function.) | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Vehicle speed setting cannot be performed with the constant speed mode. (The cruise main indicator light on combination meter illuminates when main switch is turned on, and remains on when operating SET function is operating.) | Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit |
| Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction | |
| Cruise control switch circuit | Refer to Cruise Control Switch Circuit | |
| Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit | |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit | |
| Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction | |
| Cruise control switch circuit | Refer to Cruise Control Switch Circuit | |
| Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit | |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| Vehicle stability control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| While vehicle is driven with cruise control on, the control is canceled. (The cruise main indicator light remains on.) | Stop light switch circuit | Refer to Cruise Control Switch Circuit |
| Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit | |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| Vehicle stability control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Cruise control switch circuit | Refer to Cruise Control Switch Circuit | |
| Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction | |
| Wiper switch circuit | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| Park/neutral position switch (for U660E) | Refer to INSPECTION | |
| Park/neutral position switch (for U660F) | Refer to INSPECTION | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Pulling back on the control main switch does not cancel the cruise control. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise main indicator light remains on.) | Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Depressing the brake pedal does not cancel the cruise control. (The cruise main indicator light remains on.) | Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Depressing the brake pedal does not cancel the cruise control. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Vehicle speed cannot be canceled with wiper HI. (The cruise main indicator light remains on.) | Fuse (WIP-S) | - |
| Wiper switch circuit | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Vehicle speed cannot be canceled with wiper HI. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Moving the shift lever does not cancel the cruise control. (The cruise main indicator light remains on.) | Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| Park/neutral position switch (for U660E) | Refer to INSPECTION | |
| Park/neutral position switch (for U660F) | Refer to INSPECTION | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Moving the shift lever does not cancel the cruise control. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Hunting (Speed is not constant.) | Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction |
| SFI system (for 2GR-FE) | - | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise main indicator light remains blinking. | TC and CG terminal circuit | Refer to TC and CG Terminal Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Beam axis of millimeter wave radar sensor cannot be adjusted (completed). | Check position, distance and angle of reflector | - |
| Check installation of millimeter wave radar sensor | Refer to INSTALLATION | |
| Millimeter wave radar sensor | Refer to ADJUSTMENT | |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Alarm buzzer does not sound. | Skid control buzzer circuit | Refer to Skid Control Buzzer Circuit |
| Vehicle stability control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Millimeter wave radar sensor | Refer to ADJUSTMENT | |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| No brake control (when decelerating) | Vehicle stability control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Driving support ECU | Refer to REMOVAL (TO 08/2009) | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise main indicator light remains blinking. | TC and CG terminal circuit | Refer to TERMINALS OF ECU |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The "SET" indicator does not come on (SET function operates normally) | Combination meter assembly | Refer to REMOVAL (TO 8/2009) |
| ECM (for 2GR-FE) | Refer to REMOVAL |