DTC B2286: Runnable Signal Malfunction; DTC P0335: Crankshaft Position Sensor "A" Circuit: Description
WARNING: This page is about a different car, the 2011 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
The power management control ECU receives an engine speed signal and information that indicates whether the engine is running or not. It receives the engine speed signal from the ECM via a direct line, and the information about whether the engine is running is received from the ECM via CAN. If the information sent using these 2 methods is inconsistent, these DTCs will be stored.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2286 | Information received by the power management control ECU via a direct line from the ECM and information received from the ECM via CAN is inconsistent. |
|
| P0335 | Information received by the power management control ECU via a direct line from the ECM and information received from the ECM via CAN is inconsistent. | Wire harness or connector |