LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> RX 350 FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Active Torque Control 4WD System (Diagnostics - Introduction)) >> Active Torque Control 4WD System >> DTC CHECK / CLEAR (To 8/2009) >> DTC Check / Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Check the DTCs.
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / 4WD / Trouble Codes.
      5. Check the details of the DTCs. Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Clear the DTCs.
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Operate the Techstream to clear the codes. Enter the following menus: Chassis / 4WD / Trouble Codes.
      5. According to the display on the Techstream, select the trouble code data display with the clear button.
scientia non olet · About LEMON Manuals