Installation

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU





(a) Install the ECU with the 2 screws.

(b) Connect the 2 connectors.

2. INSTALL NO. 4 HEATER TO REGISTER DUCT

(a) Install the duct with the 3clips.

3. INSTALL STEERING COLUMN COVER LOWER





(a) Attach the 3 claws to the install the steering column cover lower.

(b) Turn the steering wheel to the left and right as necessary to install the 2 screws.

(c) Install the screw.

4. INSTALL NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER Installation

5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.