DTC P2610: ECM / PCM Internal Engine Off Timer Performance: Procedure

1. Replace the ECM. Refer to REMOVAL .

NEXT: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON and turn the Techstream ON.
3. Clear DTCs. Refer to DTC CHECK / CLEAR .
4. Refer to the confirmation driving pattern P2610.
5. Enter the following menus: Powertrain / Engine / Trouble Codes.
6. Read the DTCs.

   HINT: 

   If no pending DTC is displayed, the repair has been successfully completed.

NEXT → END