Rear Power Window RH Auto Up / Down Function does not Operate with Rear Power Window Switch RH: Description

If the manual up and down functions operate normally but the auto up and down functions do not, the fail-safe mode may be functioning.

If power window initialization. Refer to INITIALIZATION has not been performed, the auto up and down functions will not operate.

HINT: 

If the pulse sensor built into the power window regulator motor assembly (for rear RH side) malfunctions, the power window control system enters fail-safe mode. The remote up and down and auto up and down functions cannot be operated during fail-safe mode. However, the power window can be closed by holding the rear power window regulator switch assembly (for RH side) at the auto up position, and opened manually by pushing down the rear power window regulator switch assembly (for RH side).