Fail-Safe Table

HINT:

If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.

Vehicle Condition	Auto Cancel Condition	Re-operation Condition
Cruise main indicator light blinks	There is open or short in stop light switch circuit There is problem with vehicle speed signal	Turn cruise control main switch on again
Cruise main indicator light blinks	There is problem with input circuit of stop light switch circuit There is problem with cancel circuit	Turn cruise control main switch on again Turn engine switch off then on again
Cruise control is cancelled (The indicator light remains on)	Vehicle speed is lower than low speed limit (approx. 40 km/h (25 mph)) while running with cruise control on VSC operates	Push cruise control main switch to + RES
	Vehicle speed is lower than stored speed by approx. 16 km/h (9.9 mph) or more	Push cruise control main switch to - SET
Cruise main indicator light goes off	There is problem with throttle body (throttle position sensor and motor)	Turn cruise control main switch on again