DTC B2313: Glass Position Initialization Incomplete: Procedure

1. Turn the engine switch off.
2. Wait for at least 10 seconds, and then turn the engine switch on (IG).
3. Check whether the DTC output recurs.

   Result

   Display (DTC Output)	Proceed to
   B2313	A
   No output	B

B → END 

A: Go to next step 

1. Turn the engine switch on (IG) and initialize the power window regulator motor. Refer to INITIALIZATION .
2. Turn the engine switch off.
3. Wait for at least 10 seconds, and then turn the engine switch on (IG).
4. Check whether the DTC output recurs.

   Result

   Display (DTC Output)	Proceed to
   No output	A
   B2313	B

B → REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY 

A → END