DTC P2610: ECM / PCM Internal Engine Off Timer Performance: Procedure

1. Replace the ECM. Refer to REMOVAL .

NEXT: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs. Refer to DTC CHECK / CLEAR .
5. Start the engine and wait for 10 minutes or more.
6. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.
7. If no pending DTC is displayed, the repair has been successfully completed.

NEXT → END