Skid Control Buzzer: Installation: Installation

WARNING: This page is about a different car, the 2011 Lexus IS 350 and 2011 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Attach the claw and install the skid control buzzer assembly.
  
  Fig 1: Identifying Skid Control Buzzer Assembly & Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the skid control buzzer assembly connector.
INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 25
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 26
INSTALL SIDE INSTRUMENT PANEL LH . Refer to INSTALLATION - Step 27
CONNECT BATTERY NEGATIVE TERMINAL
INSPECT SRS WARNING LIGHT
HINT:

Refer to DIAGNOSIS SYSTEM .