Installation (From 12/2010): Installation
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL NAVIGATION ANTENNA ASSEMBLY
- Install the navigation antenna assembly with the 2 screws.
- Engage the clamp.
- Connect the connector.
- INSTALL DEFROSTER NOZZLE ASSEMBLY . Refer to REASSEMBLY - Step 11
- INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT . Refer to REASSEMBLY - Step 12
- INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT . Refer to REASSEMBLY - Step 13
- INSTALL NO. 3 HEATER TO REGISTER DUCT . Refer to REASSEMBLY - Step 14
- INSTALL NO. 1 HEATER TO REGISTER DUCT . Refer to REASSEMBLY - Step 15
- INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
- Install the instrument panel safety pad sub-assembly. Refer to INSTALLATION .