DTC Check / Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.
- Check the details of the DTCs. Refer to DIAGNOSTIC TROUBLE CODE CHART .
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Operate the Techstream to clear the codes. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.
- According to the display on the Techstream, select the trouble code data display with the clear button.