System Description

This system lock/unlocks the doors remotely. The wireless door lock control system has the following features:

The certification ECU (smart key ECU assembly) performs the code identification process and the main body ECU (cowl side junction block LH) controls the door lock. A serial data link is provided for communication between the certification ECU (smart key ECU assembly) and main body ECU (cowl side junction block LH).
A key-integrated type transmitter is used and it contains the following 3 switches: lock switch, unlock switch and panic switch.
An LED is mounted on the transmitter to show if the battery is depleted.

FUNCTION OF MAIN COMPONENTS

Component	Function
Door control transmitter	Contains lock, unlock, and panic switches. Transmits weak electric waves (recognition codes and function codes) to door control receiver. Illuminates indicator light (LED) during transmission.
Door control receiver	Receives weak electric waves (recognition codes and function codes) from door control transmitter via electrical key antenna and changes waves to code data.
Door courtesy light switch	Turns on when door is open and off when door is closed. Outputs door status (open or closed) to main body ECU (cowl side junction block LH).
Front door lock LH	The built-in motor locks/unlocks the door. The built-in door control switch position (key-linked) detects the door key cylinder status (lock or unlock) and outputs the data to the main body ECU (cowl side junction block LH). The built-in position switch detects the door status (locked or unlocked) and outputs the data to the main body ECU (cowl side junction block LH). This switch turns off when the door is locked and on when the door is unlocked.
Front door lock RH Rear door lock LH Rear door lock RH	The built-in motor locks/unlocks the door. The built-in position switch detects the door status (locked or unlocked) and outputs the data to the main body ECU (cowl side junction block LH). This switch turns off when the door is locked and on when the door is unlocked.
Back door lock	The built-in motor open the door.1 The built-in motor opens/closes the door.2 Performs the back door open operation according to the door lock position determination of the main body ECU.1 Performs the back door open/close operation according to the door position as determined by the power back door ECU.2
Door lock position switch	Transmits door lock positions of each door to main body ECU (cowl side junction block LH).
Wireless door lock buzzer	Emits beep (answer-back) when doors are locked or unlocked by wireless operation.
Certification ECU (smart key ECU assembly)	Matches code data with registered code and outputs code data to main body ECU (cowl side junction block LH).

*1: w/o Power Back Door System

*2: w/ Power Back Door System

SYSTEM FUNCTION

The wireless door lock control system has the following functions:

Function	Outline
All door lock function	Pressing the lock switch locks all the doors and retracts the outer mirrors.
All door unlock function	Pressing the unlock switch unlocks all the doors and returns the outer mirrors.
2-step unlock function	Pressing the unlock switch once unlocks only the driver side door and returns the outer mirrors. Pressing the unlock switch twice within 3 seconds unlocks all the doors.
Power window and sliding roof open function (remote function)	After locking all the doors with the door control transmitter operation, pressing the unlock switch for 3 seconds or more opens all the power windows and the sliding roof.
Chattering prevention function	If a switch is pressed, the corresponding switch operation is performed once. If a switch is held down, the corresponding switch operation occurs only once and does not repeatedly activate. Lastly, when pressing a switch at 1 second intervals, the corresponding operation activates once for every press of the switch.
Answer-back function	When the doors are locked, the side marker signal lights flash once. When the doors are unlocked, the side marker signal lights flash twice and the wireless warning buzzer sounds twice. When the transmitter is used for opening the power windows and sliding roof, this function causes the buzzer to sound to indicate that the operation begins.
Automatic lock function	If no doors are opened within 60 seconds after they are unlocked by the door control transmitter, all the doors will lock again automatically.
Panic alarm function	Holding down the panic switch for more than 1 second sets off the theft deterrent alarm (the horn and security horn sound, the hazard warning lights, headlights, and taillights flash, and the map light and spot light illuminate).
Fail-safe function	When the key is in the vehicle, the doors cannot be locked by the lock switch.
Illuminated entry function	Pressing the unlock switch causes dome light (map light and rear map light), side step light and outer mirror foot light illumination and all door unlock operation to occur simultaneously. If the doors have not been opened, the dome light (map light and rear map light), side step light and outer mirror foot light turns off in approximately 15 seconds.
Door ajar warning function	If any door is open or ajar, pressing the lock switch will cause the wireless door lock buzzer to sound for about 10 seconds.
Memory call function	If the unlock switch of a memory call registered transmitter is pressed and the driver door is opened, the following parts move to the memory call position: front seat, front seat belt anchor, steering wheel and outer mirrors.
Transmitter recognition code registration function	Enables 7 modes for registering (writing and storing) transmitter recognition codes in the EEPROM.
Wireless power back door open/close function*	When the back door switch is pressed for 0.8 seconds or more, the back door open/closes. (Power back door operation changes according to the customize parameters. For details, refer to the Power Back Door System in CUSTOMIZE PARAMETERS .)

*: w/ Power Back Door System