LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> CT 200h Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Diagnostic Codes & Symptom Tests) >> Power Window Control System >> Symptom Tests >> Key-off Operation Function Operates even if Operating Conditions are not Satisfied >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key-off Operation Function Operates even if Operating Conditions are not Satisfied: Procedure

  1. CHECK MANUAL UP / DOWN FUNCTION 
    1. Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH, RH sides) can operate all the power windows. Refer to OPERATION CHECK .

      OK

      Manual up and down functions are normal.

    NG → See step   6 

    OK: Go to next step 

  2. CHECK REMOTE UP / DOWN FUNCTION 
    1. Check that the remote up and down functions using the multiplex network master switch assembly can operate all the power windows. Refer to OPERATION CHECK .

      OK

      Remote up and down functions are normal.

    NG → See step   6 

    OK: Go to next step 

  3. CHECK OPERATION FUNCTION AFTER POWER SWITCH IS TURNED OFF 
    1. Check the power window operation function after the power switch is turned off.

      Result

      Result Proceed to
      When power window can still be operated even after opening driver side door or front passenger side door within approximately 43 seconds of power switch being turned off A
      When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for All Doors) B
      When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for Driver Side or Front Passenger Side) C
      When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for Rear LH Side or Rear RH Side) D

    B → See step   5 

    C → See step   7 

    D → See step   8 

    A: Go to next step 

  4. READ VALUE USING TECHSTREAM (Main Body) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. Read the Data List according to the display on the Techstream.
      MAIN BODY (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      FR Door Courtesy SW Front door courtesy switch RH signal / ON or OFF ON: Front door RH open
      OFF: Front door RH closed
      -
      FL Door Courtesy SW Front door courtesy switch LH signal / ON or OFF ON: Front door LH open
      OFF: Front door LH closed
      -

      OK

      On the Techstream screen, ON or OFF is displayed accordingly.

    NG → GO TO LIGHTING SYSTEM (Proceed to Door Courtesy Light Switch Circuit) 

    OK → See step   5 

  5. REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL 
  6. GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to  PROBLEM SYMPTOMS TABLE 
  7. REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side or Front Passenger Side). Refer to  REMOVAL 
  8. REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Side or Rear RH Side). Refer to  REMOVAL