Removal

4GR-FSE STARTING: ENGINE SWITCH: REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Removal

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal

3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal

4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal

5. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Removal

6. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal

7. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal

8. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Removal

9. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Removal

10. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Removal

11. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Removal

12. REMOVE CONSOLE BOX Removal

13. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

14. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal

15. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Removal

16. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Removal

17. REMOVE ENGINE SWITCH

(a) Disconnect the switch connector.





(b) Detach the 2 claws and remove the switch.