Typical Enabling Conditions
ALL
| Monitor runs whenever following DTCs are not present | None |
MANUAL TRANSMISSION MODELS
| Time after engine switch off to on (IG) | 3 seconds or more |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | Off |
AUTOMATIC TRANSMISSION MODELS
| Both of the following conditions are met | Conditions 1 and 2 |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Time after engine switch off to on (IG) | More than 0.5 seconds |
| Starter | Off |
| Time after engine switch off to on (IG) | 3 seconds or more |
| Vehicle speed at output speed sensor | 9 km/h (5.59 mph) or more |
| Lost communication with TCM (U0101) | Not detected |