LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS 250C Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Smart Access System With Push-Button Start (For Start Function) (Diagnostic Codes & Symptom Tests) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> DTC B2285: Steering Lock Position Signal Circuit Malfunction >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2285: Steering Lock Position Signal Circuit Malfunction: Description

This DTC is stored when serial communication signals and LIN communication signals in the circuit between the power source control ECU and steering lock actuator (steering lock ECU) are inconsistent.

HINT: 

When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.

DTC No. DTC Detection Condition Trouble Area
B2285 Cable and LIN information between the power source control ECU and the steering lock ECU are inconsistent
  • Power source control ECU
  • Steering lock ECU
  • Wire harness or connector
scientia non olet · About LEMON Manuals