LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS 250C Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Rear View Monitor System (Diagnostics - Introduction) >> Rear View Monitor System >> DTC Check / Clear >> DTC Check / Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
    5. Check the details of the DTCs. Refer to DIAGNOSTIC TROUBLE CODE CHART .

      HINT: 

      The display and navigation module display may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

      System Proceed to
      Navigation System (for HDD) Refer to DIAGNOSTIC TROUBLE CODE CHART
      Navigation System (for DVD) Refer to DIAGNOSTIC TROUBLE CODE CHART
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
    5. According to the display on the Techstream, select the trouble code data display with the clear button.
scientia non olet · About LEMON Manuals