Installation

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU

(a) Install the seat belt control ECU with the 2 nuts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 2 connectors.

2. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY Installation

3. INSTALL PACKAGE TRAY TRIM GARNISH LH Installation

4. INSTALL PACKAGE TRAY TRIM GARNISH RH Installation

5. INSTALL REAR SEAT CUSHION ASSEMBLY LH Installation

6. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation

7. CLOSE METALTOP ROOF

(a) Close the metaltop roof as shown in the illustration.





8. INITIALIZE SEAT BELT CONTROL ECU

Pre-Collision System