DTC B2282: Vehicle Speed Signal Malfunction: Description

The power source control ECU and the combination meter are connected by a cable and the BEAN. This DTC is stored when: 1) the cable information and BEAN information are inconsistent; and 2) a malfunction is detected between the vehicle speed sensor and combination meter.

HINT:

When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.

DTC No.	DTC Detection Condition	Trouble Area
B2282	When both conditions below are met: Cable and BEAN information between the power source control ECU and the combination meter are inconsistent Malfunction is detected between the vehicle speed sensor and the combination meter	Multiplex communication system Combination meter Power source control ECU Wire harness or connector

Fig 1: Identifying Vehicle Speed Signal System Description