Service Data
PROPELLER SHAFT
| Propeller intermediate shaft assembly runout | Maximum runout: 0.3 mm (0.0118 in.) | |
| Propeller shaft assembly runout | Maximum runout: 0.3 mm (0.0118 in.) | |
PROPELLER SHAFT
| Joint angle | No. 2 joint angle (A) - (B) | -0°19' to -1°19' |
| No. 4 joint angle (B) - (C) | 1°07' to 2°07' |
PROPELLER SHAFT
| PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY | dimensions (between the edge surface of the center support bearing and the edge surface of the cushion respectively) | 11.5 to 13.5 mm (0.453 to 0.532 in.) |
PROPELLER SHAFT
| Adjustment washer Thickness mm (in.) | 2.0 (0.0787) |
| 4.5 (0.1772) | |
| 6.5 (0.2559) | |
| 9.0 (0.3543) | |
| 11.0 (0.4331) |