Installation

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY





(a) Install the sensor with the 3 bolts in alphabetical order.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the sensor connector.

2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY Adjustments

3. INSTALL RADIATOR GRILLE ASSEMBLY Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

6. INSTALL ENGINE ROOM SIDE COVER LH Installation

7. INSTALL ENGINE ROOM SIDE COVER RH Installation