DTC B2313: Glass Position Initialization Incomplete: Procedure

1. Turn the engine switch on (IG) and initialize the power window regulator motor. Refer to INITIALIZATION .
2. Turn the engine switch off.
3. Wait for at least 10 seconds, and then turn the engine switch on (IG).
4. Check for DTCs.
   RESULT:
   
   

   Result	Proceed to
   B2313 is not output	A
   B2313 output from driver side motor	B
   B2313 output from front passenger side motor	C
   B2313 output from rear motor LH	D
   B2313 output from rear motor RH	E

B → See step   2 

C → See step   4 

D → See step   3 

E → See step   5 

A → END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)