All Power Window Up Functions do not Operate with Entry Lock Switch: Procedure

CHECK BASIC FUNCTION (ENTRY AND START SYSTEM)
1. Check that the entry lock switch operates normally.
  OK
  
  Entry lock switch can lock all the doors.
NG → See step 4

OK: Go to next step
CHECK MANUAL UP / DOWN FUNCTION
1. Check that the manual UP/DOWN function using the master switch and regulator switch can operate all the power windows.
  OK
  
  Manual UP/DOWN function operates normally.
NG → See step 5

OK: Go to next step
CHECK REMOTE UP / DOWN FUNCTION
1. Check that the remote UP/DOWN function using the master switch can operate the power windows.
  OK
  
  Remote UP/DOWN function operates normally.
NG → See step 5

OK → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)
GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE). Refer to PROBLEM SYMPTOMS TABLE