PCV Valve: Installation: Installation

INSTALL PCV VALVE

Fig 1: Identifying PCV Valve O-Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Apply a light coat of engine oil to the O-ring.
2. Install the PCV valve.
  Torque: 3.5 N*m (36 kgf*cm, 31 in.*lbf)
  
  HINT:
  - When reusing the PCV valve, inspect the O-ring.
  - If the O-ring has scratches or cuts, replace the PCV valve.
INSTALL PCV VALVE HOSE

Fig 2: Identifying Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the hose to the PCV valve.
INSTALL INTAKE MANIFOLD
1. Install the intake manifold. Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSTALL COWL TOP VENTILATOR LOUVER RH . Refer to INSTALLATION - Step 17