Service Data
COOLING FAN MOTOR
| Standard current (Cooling fan motor) |
Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 7 A | |
| Standard current (No. 2 cooling fan motor) |
Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 11 A | |
| Standard current (Cooling fan motor) |
Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 9.8 A | |
| Standard current (No. 2 cooling fan motor) |
Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 14.8 A | |
| Standard current (Cooling fan motor) |
for 2WD | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 7.3 to 9.3 A |
| for AWD | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 14.1 to 18.1 A | |
| Standard current (No. 2 cooling fan motor) |
for 2WD | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 11.8 to 14.8 A |
| for AWD | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 14.1 to 18.1 A | |
WATER INLET SUB-ASSEMBLY WITH THERMOSTAT
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10.0 mm (0.394 in.) or more at 95°C (203°F) |
RADIATOR CAP SUB-ASSEMBLY (STANDARD JUDGMENT CRITERION)
| Standard valve (for brand-new cap) |
93 to 123 kPa (1.0 to 1.3 kgf/cm2 , 13.5 to 17.8 psi) |
| Minimum standard valve (after using cap) |
79 kPa (0.8 kgf/cm2 2, 11.4 psi) |