Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Utility / Customize Setting.
- Select the setting by referring to the table below.MAIN BODY
Tester Display Default Content Setting Seat Move Distance Standard Allows customizing of the seat movement distance for the power easy access system. OFF / Little / Standard