All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter: Procedure
- CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)
- Check that the wireless transmitter. Refer to OPERATION CHECK [08/2012 - ]
and driver door key cylinder (key linked switch). Refer to OPERATION CHECK [08/2012 - ]
lock and unlock all the doors normally.
Result
Result Proceed to Transmitter and driver door key cylinder operate normally A Transmitter does not operate normally B Driver door key cylinder does not operate normally C
B → See step 4
C → See step 5
A: Go to next step
- Check that the wireless transmitter. Refer to OPERATION CHECK [08/2012 - ]
and driver door key cylinder (key linked switch). Refer to OPERATION CHECK [08/2012 - ]
lock and unlock all the doors normally.
- CHECK MANUAL UP / DOWN FUNCTION
- Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH, RH sides) can operate all the power windows. Refer to OPERATION CHECK [08/2012 - ]
.
OK
Manual up and down functions are normal.
NG → See step 6
OK: Go to next step
- Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH, RH sides) can operate all the power windows. Refer to OPERATION CHECK [08/2012 - ]
.
- CHECK REMOTE UP / DOWN FUNCTION
- Check that the remote up and down functions using the multiplex network master switch assembly can operate all the power windows. Refer to OPERATION CHECK [08/2012 - ]
.
OK
Remote up and down functions are normal.
NG → See step 6
OK → See step 7
- Check that the remote up and down functions using the multiplex network master switch assembly can operate all the power windows. Refer to OPERATION CHECK [08/2012 - ]
.
- GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2012 - ]
- GO TO POWER DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2012 - ]
- GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2012 - ]
- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [08/2012 - ]