Inspection Procedure
NOTE:
- The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ] . Troubleshoot the power window control system after confirming that the communication system is functioning properly.
- If the power window regulator motor assembly (for front passenger door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [06/2012 - ] .
- If the main body ECU (multiplex network body ECU) is replaced, refer to Registration. Refer to REGISTRATION [06/2012 - ] .
- Check that the window lock switch is off before performing the following procedure.