Inspection Procedure
NOTE:
- The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ] . Troubleshoot the power window control system after confirming that the communication system is functioning properly.
- If the power window regulator motor assembly (for rear RH door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [06/2012 - ] .
- Check that power window system customize setting "RR Window Auto Up" is set to "Avail" before performing the following procedure. Refer to CUSTOMIZE PARAMETERS [06/2012 - ] .