DTC B2313: Glass Position Initialization Incomplete: Procedure

1. Initialize the power window regulator motor. Refer to INITIALIZATION [12/2011 - ] .

NEXT: Go to next step 

1. Check for DTCs. Refer to DTC CHECK / CLEAR [12/2011 - ] .

   OK

   DTC B2313 is not output.

   RESULT
   
   

   Result	Proceed to
   No DTCs output	A
   DTC output (Front power window RH)	B
   DTC output (Front power window LH)	C
   DTC output (Rear power window RH)	D
   DTC output (Rear power window LH)	E

B → See step   3 

C → See step   4 

D → See step   5 

E → See step   6 

A → END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)