Diagnostic Trouble Code Table [08/2012 - ]
WARNING: This page is about a different variant/trim than selected.
FOUR WHEEL DRIVE CONTROL SYSTEM
| DTC Code | Detection Item | Trouble Area | Reference |
|---|---|---|---|
| C1241/94 | Low Power Supply Voltage | 1. Battery 2. ECU-IG RH fuse 3. Wire harness (IG1 circuit, GND circuit) 4. CAN communication system 5. 4WD control ECU |
Refer to DTC C1241/94: Low Power Supply Voltage |
| C1296/96 | ABS Malfunction | 1. Brake control system (speed sensor circuit) 2. CAN communication system 3. 4WD control ECU |
Refer to DTC C1296/96: ABS Malfunction |
| C1297/97 | Steering Angle Sensor | 1. Steering angle sensor 2. CAN communication system 3. Brake control system 4. 4WD control ECU |
Refer to DTC C1297/97: Steering Angle Sensor |
| C1298/98 | Linear Solenoid Circuit | 1. Transfer transmission wire 2. Wire harness 3. Transfer control solenoid assembly 4. 4WD control ECU |
Refer to DTC C1298/98: Linear Solenoid Circuit |
| C1299/99 | Cancellation of 4WD Control | 1. Tire size 2. 4WD control ECU |
Refer to DTC C1299/99: Cancellation of 4WD Control |
| U0073/86 | Control Module Communication Bus OFF | 1. Wire harness (CANL, CANH circuit) 2. 4WD control ECU |
Refer to DTC U0073/86: Control Module Communication Bus OFF |
| U0100/85 | Lost Communication with ECM / PCM "A" | 1. Wire harness (CANL, CANH circuit) 2. 4WD control ECU 3. ECM |
Refer to DTC U0100/85: Lost Communication with ECM/PCM "A" |
| U0126/84 | Lost Communication with Steering Angle Sensor Module | 1. Wire harness (CANL, CANH circuit) 2. 4WD control ECU 3. Steering angle sensor |
Refer to DTC U0126/84: Lost Communication with Steering Angle Sensor Module |
| U0129/83 | Lost Communication with Brake System Control Module | 1. Wire harness (CANL, CANH circuit) 2. 4WD control ECU 3. Skid control ECU |
Refer to DTC U0129/83: Lost Communication with Brake System Control Module |