DTC Check / Clear [08/2012 - ]

CHECK FOR DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: All ECUs / Trouble Codes.
4. Check for DTCs on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: All ECUs / Trouble Codes.
4. Clear the DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.