DTC C1409: Front Speed Sensor RH Performance; DTC C1410: Front Speed Sensor LH Performance: Procedure

1. Replace the front speed sensor and the front axle hub sub-assembly (front speed sensor rotor). Refer to REMOVAL [08/2012 - ] .

   HINT: 

   The front speed sensor rotor is incorporated into the front axle hub sub-assembly.

   If the front speed sensor rotor needs to be replaced, replace it together with the front axle hub sub-assembly with front speed sensor.

   NOTE:

   Check the speed sensor signal after replacement. Refer to TEST MODE PROCEDURE [08/2012 - ] .

   HINT: 

   If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step. Refer to PROBLEM SYMPTOMS TABLE [08/2012 - ] .

NEXT → END